Sportstar Outdoor Pioneer II, Руководство пользователя

Страница: 7 / 55

2. Normal Compass calibration mode: Follow this procedure if the watch has already
been calibrated previously.
2.1) While in Compass mode, press and hold S4 for 2 seconds. The watch will display CAL
HOLD.
2.2) Continue holding S4 until the watch will display ROTATE CAL.
2.3) Rotate the watch horizontally 2 times at a rate of 15 seconds per rotation.
2.4) Press S1 or S2 or S4 to end calibration. The watch will display END CAL and then go to
normal Compass mode. This procedure did not consider the declination angle of your current
location. If you know the declination angle of your current location or you want your compass
direction to be more accurate, follow the next procedure.
2.5) Setting the
Declination angle:
2.6) After step 1.3 above, press S3 to set the declination angle of your location. The first digit
will start to flash.
2.7) Press S1 or S2 to change the value.
2.8) Press S3 to set the next digit. The next digit will start to flash.
2.9) Press S1 or S2 to change the value. The compass offset range is from 00 to 90 degrees.
2.10) Press S3 to set the direction (East or West). E or W will start to flash.
2.11) Press S1 or S2 to change.
2.12) Press S4 to exit setting mode. The watch will also auto exit calibration mode if there is no
button operation after 2-3 minutes. The watch will display END CAL and then go to Compass
mode.