P.11
• The area that you choose should be policed for glass, rocks
or anything jagged or sharp that could endanger your
children’s safety. The surface underneath your play system
can cause or prevent injuries. We have additional suggestions
in the suggested playground surfacing section.
• Do not build your play set on top of surfacing material.
• Please install this equipment facing away from the sun to
avoid causing dizziness whilst playing.
• Check all nuts and bolts twice monthly during the season
and tighten as required. We recommend you check the
swing beam and hardware every two weeks. It is particularly
important that this procedure be followed at the beginning
of each season
• Oil all metallic moving parts monthly during the usage period.
• Check all nuts and bolts twice monthly during the season
to be certain they are in place. Replace when necessary. It is
especially important to do this at the beginning of each new
season.
• Check swing seats, ropes, cables and chains monthly
during usage season for evidence of deterioration.
Replacement should be made of any swing seat that has
developed cracks in the plastic seat or has exposed metal in
the edges of the swing seat. If there are already exposed
metal inserts on the edge of the seat, immediately remove
the seats and chains to prevent serious injury. Ropes, cables
and chains should be removed and replaced if excessive
wear is found. Contact OUR SERVICE CENTER for
replacement parts.
• Maintaining the Play set on a level location is very
important. As your children play, your Play set will slowly dig
its way into soil, and it is very important that is settles evenly.
Make sure the play set is level and true once each year or at
the beginning of each play season.
• Hardware: inspect for tightness.
• Swing hangers: check to insure correct installation. Make
sure that the bend of the swing hanger is positioned tightly
against the stop washer and swing beam. The axis of the
swing hanger bushing must be perpendicular to the swing
motion. If squeaking occurs the nylon bushings can be
sprayed with WD-40 or other house hold lubricant.
• The instructions and owner’s manual for your new play set
should be read in its entirety before assembly, to minimize
problems and safety issues. We recommend reading the
parts for your play set as discussed in the HINTS AND TIPS AS
LISTED BELOW.
• Check all coverings for bolts and sharp edges and replace
when required.
• Do not adjust the length of the swing rope.
• Never use pliers to tighten up screws –these can
cause damage to both the paintwork and the special
anti-corrosion plating
• To help maintain the products appearance, occasionally
clean the seats and metal framework with a damp cloth
lightly – but DO NOT use abrasive chemical cleaners.
• When the time comes to disassemble and dispose of this
product, please completely disassemble the unit and discard
of it in a safe place and manner so as not to present any
hazard to any individual. It is important to check and
maintain the main parts at regular intervals. If these checks
are not carried out, the toy could overturn or otherwise
become a hazard. Whenever practical, the instructions shall
Positioning Your Play Set
area of your yard to minimize ground preparation.
• Place the equipment not less than 2M from any structure
or obstruction such as a fence, garage, house, overhanging
branches. Laundry lines, or electrical wires.
Содержание NS-004
