3
ALWAYS check the slide or other parts exposed to the body for extreme heat from the sun before allowing children
to use the equipment.
ALWAYS prevent access and secure from any unauthorized use when there is no adult supervision.
DO NOT allow pets or other animals near the equipment to prevent damage or injuries.
INSPECTION PRIOR TO EACH USE OR DAILY INSPECTION
DO NOT use the equipment if any bolts or nuts are missing or loose. ALWAYS check to ensure the equipment
and all parts are well secured and stable before each use.
ALWAYS clear the play area of any rocks, sharp objects, or any materials that could be potentially hazardous to
users.
DO NOT attach items to the equipment that are not specifically designed for use with the equipment, including, but
not limited to, jump ropes, clothesline, pet leashes, cables and chains as they may cause choke hazards.
The steel and plastic parts used in your product are subject to normal wear. Gradual deterioration of the material
will occur, the speed of which will depend on the level of exposure to UV rays, airborne pollution, outdoor weather
conditions such as rain and wind and the amount of use. You must inspect the equipment prior to every use.
This includes, but is not limited to inspecting the set for cracks, excess wear, missing parts, loose connections, and
for overall integrity. When the set shows any signs of weakness, you must stop using the play set immediately,
properly store the set or restrict access by users until the condition is resolved.
Verify that the suspended climbing ropes, chain or cable are secured at both ends and tightened, so that there
is no loose ropes, chain or cable hanging that can result in choking hazard.
When conducting inspections, it is recommended that you use the Suggested General Maintenance
Checklist and Routine Inspection and Maintenance Issues checklists provided by the US Consumer
Product Safety Commission, a copy of which is contained in this user manual.
CARE & MAINTENANCE INSTRUCTIONS
Inspect all nuts and bolts twice monthly during the usage season for tightness and tighten as required. It is
particularly important that this procedure is followed at the beginning of each season.
Oil all metallic moving parts monthly during the usage period.
Sand rusted areas on metal tubing and repaint using a nonlead-based paint meeting the requirements of Title 16
CFR Part 1303.
Check swing seats, ropes, cables and chains monthly during usage season for deterioration. Replacements
should be made in accordance with the manufacturer’s instructions.
Check all coverings for bolts and sharp edges twice monthly during usage season to be certain that they are
in place and replace when necessary. It is especially important to do this at the beginning of each new
season
Do not use when the temperature drops below 32 degrees F (0 degrees C); remove and store the plastic swing
seats and slides indoors.
