NOTE:
1. Do not over-tighten the nuts and bolts at every step.
2. Do not snap in the cover of plastic cap until you have finished the assembly of
each step and went back to tighten all of the nuts and bolts.
Glide Ride Assembly
STEP 8
Attach R8, L3 to A2 as shown.
Secure using N3R, L5 and N7.
Used special socket wrench and screwdriver
to tighten the N3R and N7.
STEP 9
Attach M5 to the bottom of L1-N (straight side).
Secure with N4 and N12.
Insert M2 into M1 and align holes if M2 is not
pre-assembled.
Repeat above for remaining L1-N assembly.
N3R
L5
L5
L3
A2
R8
N7
N7
USE SPECIAL SOCKET
WRENCH AND SCREW
DRIVER TO TIGHTEN
N7.
M1
N4
N4
L1-N
M2
N12
N12
M5
20
