SPORTSPOWER MSC-3990 Скачать руководство пользователя

Страница: 1 / 37

DO NOT RETURN TO THE STORE.

For customer service, please call 1-866-370-2131 Monday-Friday 9:00am-5:00pm Eastern Time

or visit our website at www.sportspowerltd.net

SPORTSPOWER LTD, FLAT M, 3/FLOOR, KAISER ESTATE PHASE 3, 11 HOK YUEN STREET, HUNGHOM, KOWLOON, HK.

Corporate US toll-free number 1-800-497-6106

8 STATION SWING SET

MODEL # MSC-3990

OWNER’S MANUAL

ASSEMBLY INSTRUCTION, CARE, MAINTENANCE AND USER’S GUIDE

FOR RESIDENTIAL USE ONLY

- This product is intended for use by children from ages 3 to 8

- This unit is designed for use by up to 8 children at one time.

Maximum weight of each user is 100 lbs.(45.4kg), with a

combined maximum weight of 800lbs(363kg)

- Assembly requires two adults

- Do not allow more than one child to play on the individual

swing/slide at the same time

- Do not allow children to slide down head first.

WARNING

PLEASE RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE

Содержание MSC-3990






































Результаты поиска

Содержание MSC-3990

Отзывы:

Похожие инструкции для MSC-3990

Бренды по названию

Популярные бренды

SPORTSPOWER MSC-3990, Руководство по сборке, уходу, обслуживанию и эксплуатации

Результаты поиска

Содержание MSC-3990

Отзывы:

Похожие инструкции для MSC-3990

Бренды по названию

Популярные бренды