DESCRIPTION
3VY6U
DOUBLE SWING & GLIDE
ASSEMBLY
INSTRUCTION
20/F, Parkview Centre, 7 Lau Li Street, Causeway Bay, Hong Kong.
After Service Centre (+44) 0330 0904 420
PAGE 5 OF 19
•
Shredded bark mulch, wood chips, fine sand or fine gravel are
considered to be acceptable shock-absorbing surfaces when
installed and maintained at a sufficient depth under and around
playground equipment. However each material is only effective
when properly maintained. Material should be checked periodical -
ly and replenished to maintain correct depth as determined neces-
sary for your equipment. Otherwise serious injuries may occur
from a fall.
•
Toys shall be accompanied by maintenance instructions drawing
attention to the need of carrying out checks and maintenance of
the main parts at regular intervals; if these checks are not carried
out the toy could overturn and otherwise become a hazard. Whenever
practical, the instructions shall also be affixed to the toy.
•
Please retain these instructions for future reference.
TIGHTENING NUTS & BOLTS
•
At the start of assembly DO NOT tighten nuts or bolts fully, so
as to allow some possible adjustment for ease of assembly.
•
After all major components are assembled, go back over all bolts
and nuts and properly tighten all of them before using this product.
