July 20,2012
3
602-763I 6’ Single Covered Bench w/ Back Inground Mount
INSTALLATION INSTRUCTION
FOOTING INFORMATION
Total footing depth is 24” plus the height of the blocking
material. No surfacing is required with this equipment.
If the equipment is installed on a unlevel grade you must
adjust the footing depth to accommodate the grade. For
instance, if the grade for this component is 1” higher than
the surface grade of the main playground post you must dig
your footing hole 1” deeper.
You must place the bottom of the support post on a suitable
flat blocking material to prevent it from sinking further into
the soil. We recommend you use a brick, block of wood or
several inches of gravel. The footing depth does not include
this blocking material since materials used often vary.
It is the owner/installers responsibility to check local
building codes and to comply with those codes. All footing
depths listed here are recommendations and local soil types
and frost lines may require a deeper and/or wider footing
depth. If that’s the case you must add more blocking
material to accommodate the deeper footing, as the post
length will still only be installed at the depth listed in this
instruction manual.
Assemble the entire unit before adding the concrete unless
instructed to do so in the individual component instruction
sections.
