Safety Bracket Index
www.sportsplayinc.com
Safety Index
Safety Bracket Install
*Note: Because the wheel chair accessible table overhangs the
frame install these brackets to prevent the table from flipping
over.
1. Either place unit on an existing concrete surface or dig holes 10”
deep and 10” wide to mount the table to.
2. First square unit and ensure all bolts are tight.
3. Place table in desired location and set brackets (11) onto frame.
Mark holes and remove bracket and table from location.
4. Drill the marked holes 4” deep with a 3/8” bit.
5. Remove the nuts and washers from the anchor bolts (12) and
place the anchor bolt into the drilled holes. Back the bolt in the
anchor out far enough so there are sufficient threads exposed for
the nut after the bolt goes through the bracket and washer.
6. Put the table back in place and attach the bracket. Re-attach the
nuts and washers to the anchor bolts. Do not tighten completely
until all nuts and washers have been re-attached.
Bracket (12)
11
12
Bracket Install
Detail
2
Concrete
