Fig 3
Fig 5
Fig 2
Fig 1
Fig 4
Fig 6
Fig 7
ASSEMBLY INSTRUCTION
WARNING: BE PREPARED FOR TEAM LIFT WHEN ASSEMBLING/MOVING HEAVY TABLE.
WARNING: SHARP EDGES CAN CAUSE INJURY. USE CAUTION WHEN
ASSEMBLING/MOVING TABLE.
WARNING: DO NOT SIT OR STAND ON TABLE OR SHELF.
WARNING: MAKE SURE CASTERS ARE IN LOCKED POSITION BEFORE USE.
1. Place the table top on it’s face on the floor.
2. Insert the Upper Brackets into the square tubes situated at each side of the Table Top, screw
them together using M8 screws and Nuts.
[
Fig.1,2
]
3. Insert the Down Brackets into the Upper Brackets. (Pull out the Locking Pin before
inserting)
[
Fig.3
]
4. Fix the Bottom Support rail using Down Brackets and M8 screws, and then fix two Support Bars at
their corner using M5 screws.
[
Fig.4
]
5. Fix the bottom bases to Down Bracket by Support Boxes and M8 screws and washers.
[
Fig.5
]
6. Screw the castors into the corner of Bottom Bases, and then stand upright.
[
Fig.6
]
7. Adjust the table to suitable height, and lock it using the locking pin and wing screws.
[
Fig.7
]
.
Safety Tips
·
Use caution when cleaning or handling to prevent risk of injury from exposed metal edges.
·
Do not overload the table or shelf.
Cleaning
·
Before use, remove protective film then clean the table.
·
Clean the table using a cleaning agent suitable for use with stainless steel and galvanized surfaces.
·
Always remove cleaning agent residues, as this can discolor the surface.
·
Never leave any surface damp as this may cause discoloration. Wipe dry thoroughly.
201712