15
UPPER
LEVEL
Carburetor
Check choke operation
l
Cooling
system
Check fan damage.
l
Starting
system
Check recoil starter operation.
l
Idle speed
Check and adjust engine idle speed
l
Fittings /
Fasteners
Check all fittings and fasteners correct if
necessary.
l
Crankcase
breather
Check breather hose for cracks or
damage. Replace if necessary
l
Generator
Check the pilot light comes on
l
ENGINE OIL REPLACEMENT
1. Place the machine on a level surface and warm up the engine for several
minutes. Then stop the engine and turn the fuel cock knob to “
OFF
”. Turn the
fuel tank cap air vent knob clockwise.
2. Loosen the screw and remove the cover.
3. Remove the oil filler cap
4. Place an oil pan under the engine.
Tilt the generator to drain the oil completely
5. Replace the generator on a level surface.
6. Add engine oil to the upper level.
7. Install the oil filler cap
8. Install the cover and tighten the screw
Содержание GEN1000i
