background image

5. Troubleshooting - TFT LCD Screen Does Not Light Up 

Order 

 

 

Part

Troubleshooting

TFT LCD 

driver board 

1.  Inspect the cable connections. 
2.  Inspect whether the U3 program IC is installed properly, or replace the IC as a test. 
3.  Replace the TFT LCD driver board as a test. 

2 30-pin 

cable 

1.  Inspect cables for bad connections or an electrical open. 

3 TFT 

LCD 

panel 

2.  Inspect cable connections and look for an electrical open. 
3.  Replace the TFT panel as a test. 

4 TUNER 

board 

1.  Inspect the TV terminal and exterior TV signal cable connections. 
2.  Inspect cables for bad connections or an electrical open. 

5 20-pin 

adapter 

Inspect the adapter connections and look for an electrical open. 

6 AV 

board 

1.  Inspect the AV board and exterior DVD signal cable connections. 
2.  Replace the AV board as a test. 

Cable 

Inspect cables for bad connections or an electrical open. 

5-pin cable 

Inspect cables for bad connections or an electrical open. 

9 Inverter 

board 

1.  Inspect CN1, CN2 cable connections. 
2.  Replace the inverter board as a test. 

10 2-pin 

cable 

Inspect cables for bad connections or an electrical open. 

Содержание T680E



















Отзывы: