SportsArt Fitness T645, Руководство по ремонту

Страница: 38 / 52

Other descriptions:
Model: T645
Item: Self-lubrication system operation
System: The system is consisting of control board, lubrication motor VR, speed sensor and lubricant bottle
Operation process: 1. When the treadmill is in motion, the lubrication control board will track the mileage. When it reaches 1000Km, the
program will perform lubrication procedure.
2. When it enters self-lubrication procedure, the motor will start and drip about 49 drops of lubricant; total of 10cc.
3. The bottle holds 400cc of lubricant; it lasts 40 times of self-lubrication procedures and about 40000Km distance.
The distance display will reset to 0 each time the self-lubrication is performed.
4. Lubrication display -
Press <RESET> key to display total distance in mile & km; total time
Press <UP> key to display total exercise distance, speed and software version
5. When the lubrication procedure performs exceed 40 times, the display will show “CH O’L” and beeping sound;
that means it is time to replace the lubricant bottle.
6. Untighten the screws shown on below figure and push the metal plate to remove the lubricant bottle when
replacing lubricant bottle. Swap the bottles out with the existing cap.
7. The self-lubrication system is an independent system from the main console; it is operating under its own
programming and detecting system.
3-14-1
Lubrication system control board
ENTER
UP