SportsArt Fitness C530, Руководство пользователя

Страница: 16 / 25

16
OPERATION Operating guide
Exercise Target Setting
Exercise Target Setting is the function as COUNTING DOWN by Time or
Distance. If user doesn’t set any Exercise Target as the free-ride mode then
the monitor will be counted up all exercising values.
1. Under free-ride mode, to press ENTER key to enter the setting mode of
exercise target value for TIME or DISTANCE.
2. To press UP or DOWN key to adjust the setting values.
To press UP + DOWN keys simultaneously to clear the setting values.
3. The setting mode will be close without pressing any key for 1 minute.
4. After setting the monitor will start to measure and display every exercise
values.
Once the exercise target value is reached, the monitor will beep for 3
seconds, press any key can stop the beep. The monitor will be entered
automatically into the free-ride mode without any new setting.
Display Values Selection
To press UP key to select display values as below changed:
SPEED ↔ CAL (CALORIE)
RPM ↔ DIST (DISTANCE.)
Reset Exercise Values
To press ENTER/RESET key and hold for 5 seconds to clear all exercise values and
exercise target values.
Metric / Imperial system
Use a pen’s tip or pin and push down the “k/m” button on the back of the meter to
switch between imperial and metric display