SportsArt Fitness C52R, Руководство пользователя

Страница: 30 / 32

6-3: A Polar transmitter belt must be worn properly during workout to allow the
heart rate signal to be successfully transmitted to receiver located inside the
display console. A "NO HEART RATE READING" message will scroll across
the dot matrix window if the display does not detect a heart rate signal for
more than 3 seconds. Once the display can detect a heart rate signal again,
the scrolling message will be gone, then will continue the heart rate function
again.
6-4: The resistance level starts out at LEVEL 5; and RPM is 50. "SPEED UP"
appears on the dot matrix window if your speed is under your lowest RPM
(Your Suggested RPM
10) for more than 25 seconds.
6-5: "PEDAL TO START" appears twice on the dot matrix window if no one
exercises on theunit for more than 5 seconds. Resistance reverts to LEVEL 5;
RPM reverts to 50 RPM; prompts appear every 5 seconds.
6-6: Window 1 toggles between TIME and LEVEL every 4 seconds. (It shows
accumulated workout time and the resistance level.) When the scan indicator
lights up, the MODE-left button will not operate.
7. COOL DOWN Mode:
After completing your desired workout program, accumulated data including TIME,
CALORIES, DISTANCE, and HEART RATE appear.
7-1: After displaying the data, the display beeps once and enters COOL DOWN
mode. The COOL DOWN program lasts 5 minutes. TIME indicator lights. In
this mode, time counts down.
7-2: "GOING TO COOL DOWN" appears onece on the dot matrix window, then
the unit reverts to RESISTANCE LEVEL mode. The resistance decreases
one level every 10 seconds.
7-3: When COOL DOWN mode ends, the display beeps once and "SELECT
PROGRAM OR PRESS START" scrolls across the dot matrix window.
(Please refer to Page 21 Select PROGRAM for more details.)
7-4: If you enter a PROGRAM without first establishing the USER ID, display
reverts to the "Select USER" section after compeletion of the COOL DOWN
process.
–
• •
28
PDF created with pdfFactory trial version www.pdffactory.com