background image

A.  SAFETY INSTRUCTIONS

 Read all cautions/warnings and obtain proper instruction on use of the machines 

prior to using.  Use appropriate positioning and controlled movements.

 Assemble and operate the strength on a solid, level surface.  Do not use outdoors 

or near water.

 Never allow children on or near the strength.

 Make sure all fasteners are properly tightened for safety.  DO NOT use the 

strength if the unit is disassembled in any way.

 Keep head, limbs, and fingers clear of all moving parts.

 If at any time during exercise you feel faint, dizzy or experience pain, stop and 

consult you physician.

 

DO NOT wear loose or dangling clothing while using the equipment.  Keep away 

from all moving parts.

 Use care when mounting and dismounting the unit.

 DO NOT use any accessories that aren't specifically recommended by the 

manufacturer.  These might cause injuries or cause the unit to fall.

 Close supervision is necessary when this strength is used by, on, or near 

adolescent, invalids, and disabled persons.

 Use this strength only for its intended use as described in this manual.

 Never operate this strength if it has been damaged in any way.  If it is not working 

properly, been dropped or damaged, contact your dealer.

 

DO NOT attempt to fix a 

broken or jammed machine.  Notify floor staff.

 Never drop or insert any object into any opening.

1

Содержание A933











Отзывы: