A0510 Brace Hanger
1
/
2
"-13 x 2
1
/
2
"
Cap Screw, Flange Lock Nut
3
Bolt Bank Hanger to Main Stem.
Please Note:
If installing a Height Adjuster, skip this step and see sepa-
rate assembly instructions.
Please Note:
Bolt Bank Hanger so that Bank will be installed 2"-3" above
playing height. The Bank will be lowered into playing position after instal-
lation is completed.
Bank Hanger
(C096.062 for Rectangular Banks; C096.059 for Fan Banks)
Main
Stem
1
/
2
"-13 x 2
1
/
2
"
Cap Screws (4),
Flange Lock Nuts (4)
Half Clamp
Goal Brace
Please Note:
Use A0505 for goals with mounting holes center spaced at
5" x 5"; use A0512 for goals with mounting holes center spaced at 5" x 4".
Please Note:
A Goal Brace cannot be used in conjunction with a Height
Adjuster.
1
Attach Goal Brace to Main Stem using 6" x 4" or 4" x 4" Half Clamp,
½"-13 x 2½" Cap Screws, and Flange Lock Nuts.
Please Note:
The Goal Brace replaces the lower Bank Hanger as the
means of attaching the lower half of the bank to the Main Stem.
4
Install Goal Brace.
5
Attach Bank and Goal.
Please Note:
Assemble bank/goal face down on sawhorses (use heavy
blanket or other padding to protect banks from scratches).
1
If mounting brackets are not already attached to bank, install 0022 Bank
Brackets ½" from horizontal edges and
5
/
8
" from vertical (top) edges,
using 1¼" Hex Head Self-tapping Screws.
2
Place bolts into slots of top Brackets (threads should be facing out).
3
Insert bolts into mounting holes on Bank Hangers and fasten using Flat
Washers and Keps Nuts. (Lower portion of Bank should be resting on
the Goal Brace, if one is included).
4
Place Goal in position (holes over holes).
5
Bolt Goal to Bank (and Goal Brace, if necessary) using
3
/
8
" Carriage
Bolts and Flange Lock Nuts.
Please Note:
Most glass banks come with studs protruding from the bottom
two goal mounting holes. On these banks, secure using
3
/
8
" lock nuts.
Bank
Keps Nut
Flat
Washer
Bank
Hanger
3
/
8
"-18 x 1
1
/
4
"
Carriage Bolt
Bank
Flat
Washer
Bank
Hanger
3
/
8
"-18 x 1
1
/
4
"
Cap Screw
Bank mounting procedure for most Fan Banks
Bank mounting procedure for most Rectangular Banks
C002.675
Saddle Bracket
Stem
U-Bolt
Please Note:
Saddle Bracket goes AROUND the square
tube of the bank hanger.
Basketball Backstops by Progressive Sports Construction Group—Ceiling Suspended
Page 25 of 37
(877) 413-0957
(877) 413-0957
