TEAM BALL FEEDER
Sports Attack, LLC.
•
800-717-4251
•
sportsattack.com
5
3. Assemble tumbler and belt. Ensure that the belt is in alignment with motor pulley.
Thread tensioning bolt to create light tension on drive belt. See Figure 3.
4. Assemble feeder on tripod legs. Install rear leg foot to rear leg. Position rear leg
foot so that it is parallel to a line connecting the front legs. See Figure 4.
5. Remove ball feed chute from pitching machine and install feed chute supplied
with the Team Ball Feeder.
6. Assemble ball feed trough.
NOTE: The Team Feeder is supplied with one (1) ball feed chute.
TEAM BALL FEEDER
ASSEMBLY
(cont’d)
Figure 3
Insure sufficient tension on the tensioning bolt to keep the belt from slipping.
To apply tension, rotate bolt clockwise.
Figure 4
Rear leg is parallel to the front legs.
CAUTION
PERSONAL INJURY
HAZARD
Use of the softball feeder
on a machine set up for
baseball could result in
equipment damage and/or
personal injury.
Team Ball F
eeder Assembly