SNAP ATTACK™ FOOTBALL MACHINE
Sports Attack, LLC.
|
800.717.4251
|
www.sportsattack.com
3
Component Vie
w
COMPONENT VIEW
ADDITIONAL
INFORMATION
If you have any questions
regarding the safe operation
of the Snap Attack, please call:
Sports Attack Customer
Service Department
Ph
800 .717 .4251
Fx
775 .345 .2883
GENERATOR
INFORMATION
1 . Snap Attack requires a
generator capable of providing
clean electricity (invertor
technology) of a minimum
1000 watts at 120 volts 60hz .
2 . Be sure the power switch is
“OFF” before plugging Snap
Attack into the generator .
3 . Start the generator and allow
it to reach full speed before
turning the power switch “ON” .
IMPORTANT:
Generator speed
fluctuations can damage the
electronic speed control .
Maintain adequate fuel in the
generator at all times .
4 . Turn the Snap Attack power
switch “OFF” before shutting
off the generator and before
unplugging the Snap Attack .
Pass & Kick
Elevation Handle (E)
On/Off Switch (F)
Throwing Head
Attachment Bolts (2)
20 Amp
Circuit Breaker
in Control Box
Ball Feed
Handle (J)
Undercarriage
Horizontal Pivot
Control Handle (D)
Wheel Guard
(with Safety Decals)
Lifting Handle (C)
Motor
Travel Wheel
(Heavy Duty)
Cane Tip with 3 Locking
Telescoping Legs (not shown)
Throwing
Wheels
FIGURE 1
Throwing Head
Ball Feed
Cradle (I)
Lifting Handle
Lifting Handle
Assembly Feet
Motor
Travel Wheel
(Heavy Duty)
FIGURE 2
Throwing Head & Undercarriage View
Controller
110V, 220V
Frame
Lock Pin (A)
Speed
Control Dial (F)
Wheel Tilt
Handle (G)
Left Wheel Tilt
Handle (G)
Ball Feed
Slide