background image

7

ELITE E-HACK ATTACK™ BASEBALL MACHINE

Sports Attack, LLC.  

|

  800.717.4251  

|

  www.sportsattack.com

Activ
e Sequenc

es/Modif

y Pitch

WARNING

PERSONAL 

INJURY HAZARD

Carefully read all instructions in 

this manual, and all labels and 

warnings on ELITE e-Hack Attack  

before using this machine.
Use machine only under adult  

supervision. Failure to operate  

ELITE e-Hack Attack as described 

in this manual can result in severe  
personal injury or death.

ELECTRICAL 

SHOCK HAZARD

The ELITE e-Hack Attack must be  

connected to a properly  

grounded electrical receptacle.
Do not operate on wet ground.

CAUTION

PERSONAL 

INJURY HAZARD

Keep hands away from throwing 

wheels anytime the machine is  

connected to a power source.
Carefully check the ELITE e-Hack 

Attack for completeness and 

condition before connecting  

to electrical power.

EQUIPMENT 

ELECTRICAL DAMAGE

Keep hands away from throwing 

wheels anytime the machine is  

connected to a power source.

Save Pitch in Existing Sequence

 

Select a NAMED SEQUENCE button. This will transport the pitch in the ACTIVE 

SEQUENCE page for the existing SEQUENCE.

Delete a Saved Sequence

 

Select DELETE. Touch the NAME of the sequence to be deleted. Touch the DELETE 

button again to cancel.

Active Sequences  

When you arrive at Active 

Sequences to save a pitch you can:

Edit Pitch Name Before Saving

 

Touch the text input box to access 

the virtual keyboard. Press ENTER 

when complete.  

Save Pitch

 

Select an unused location (EMPTY 

PITCH) or a previously names 

location that the new pitch will 

REPLACE. Or, select the INSERT 

button. Next, touch a PITCH NAME 

button to INSERT the new pitch 

ABOVE it. Once the PITCH NAME is  

saved, the SEQUENCE NAME 

previously selected will be deleted.

Modify Pitch  

Use the motor controls along with 

the Horizontal and Vertical 

Adjusters to customize a pitch.

Save Pitch

 

This wiill save a newly modified 

pitch under the same name and in 

the same location that it was  

previously saved.  This will replace  

the previous version.

Save to Favorites

 

This will save the pitch to 

FAVORITE PITCHES page with 

the option to rename.

Add to Sequence

 

This will save the pitch to Sequence with the option to rename. ADD TO SEQUENCE  

transfers the pitch to FAVORITE SEQUENCE page where a sequence name is selected 

forthe pitch.

Active Sequences Page

Modify Pitch Page

Содержание ELITE E-HACK ATTACK













Отзывы: