6
5. PROGRAMMING YOUR FINGERPRINT
1.
Remove the battery compartment cover
and locate the reset button inside.
2. Press and release the reset button.
The biometric scanner will beep and
the indicator ring will illuminate,
indicating you are now in
programming mode.
NOTE:
*Keep vault lid open while
programming new fingerprint*
Recording mode will time out after 10
seconds of inactivity. If this occurs press
reset button and begin again.
Battery
Compartment
Remove Screw
For Entry
St
ep 1
3. Place and hold the pad of your
finger on the scanner until it flashes
green and beeps one time.
4. Repeat at least 3 more times until
there are 2 consecutive beeps and
2 green flashes.
BEEP
BEEP
BEEP
HOLD FOR BEEP
LIFT FINGER
St
ep 3
St
ep 4
2 BEEPS + 2 GREEN FLASHES = SUCCESS!
St
ep 2
Reset
Button
