manualshive.com logo in svg

SPORTS AFIELD INSTINCT Series, Инструкция по эксплуатации

Поделиться
Скачать
SPORTS AFIELD INSTINCT Series Скачать руководство пользователя страница 14

 

4. Install the E-Lock onto the safe door 

by aligning the lock face to the backer 

plate and turning clockwise until you 

feel the E-lock click into place. 

The SA5529INS model will have 

two remaining handles inside of 

the safe. Locate and install them 

into the threaded openings of 

the central hub. 

Plug E-lock cable into the 

back of the E-lock. The cable 

connector will only fit one 

way into the connector in 

the lock face.

2. The e-lock requires 1x9V alkaline 

battery. The battery compartment 

is located on the back of the lock 

face. Insert the battery in the proper 

orientation. Keypad will beep when 

batteries are successfully installed.

WARNING: The batteries must be inserted with 

the correct polarity. Exhausted batteries must be 

removed from the product and discarded safely.

Do not mix old and new batteries. Do not mix alkaline 

or standard (carbon – zinc) batteries. Do not use 

rechargeable (nickel – cadmium) batteries.

1. Remove lock face from box 

located inside of safe. 

3.

 

11. E-LOCK INSTALLATION

St

ep 3

St

ep 2

St

ep 1

7

BACK OF LOCK FACE

FRONT OF LOCK FACE

St

ep 4

9V BATTERY

Содержание INSTINCT Series




















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды