6
6. PROGRAMMING YOUR FINGERPRINT
2. PLACE AND HOLD the pad of your
finger on the scanner until indicator
ring flashes green once and beeps
once.
3. Quickly REPEAT Step 2 at least 3
more times until there are 2
consecutive beeps and 2 green
flashes. That finger is now
programmed.
If unsuccesful, the indicator Ring
will flash red 5 times and beep 5
times. Repeat this section again.
1.
On the inside of the safe, near
the battery compartment, locate
the brass cap. Unscrew and
remove the cap. Press the reset
button. You will hear 1 beep and
the indicator ring will illuminate
white on the front of the door
indicating that you are now in
programming mode.*Keep safe
door open while programming
new fingerprint*
Inactivity Timeout: If this
programming sequence is not
completed within 10 seconds the
indicator ring will flash red 5 times
and beep 5 times. Return to step 2
to restart this process.
LIFT FINGER
St
ep 2
St
ep 3
St
ep 1
x
1
x
1
GREEN
LED
x
2
x
2
GREEN
LED
Red Reset Button
Brass Cap
BEEP
BEEP
BEEP
HOLD FOR BEEP
2 BEEPS + 2 GREEN FLASHES = SUCCESS!
