ADVICE W
ITH REGARD TO BATTERIES
•
Remove the batteries if the are empt or if ou are no longer using the product. n
this wa , ou will avoid damages that can be caused b leaking.
•
The batteries ma not be charged or activated with other means, dismantled,
thrown into fire or short circuited. There is a DA
ER F E P
S
•
Preferabl use alkaline batteries, since the last longer than regular zinc carbon
batteries.
•
A batter replacement is necessar as soon as the displa starts to fade or fades
completel . Alwa s replace all old batteries with new ones and make sure that the
batteries are inserted with the correct polarit .
•
Batteries could be fatal if swallowed. f a batter is swallowed, it ma lead to
serious internal in ur and death within 2 hours. For this reason, alwa s store new
and depleted batteries as well as the product out of the reach of children. f ou
suspect a batter has been swallowed or otherwise entered the bod , seek medical
attention immediatel .
•
f a batter leaks, avoid contact with skin, e es and mucous membranes. n case of
acid contact, rinse the affected areas thoroughl with water and immediatel seek
medical attention.
INFORMATION ON ASSEMBLY
•
The product should be carefull assembled b a responsible adult. Ask for the
assistance of another, technicall skilled person in case of doubt.
•
Before beginning assembl of the product, read all assembl steps carefull and
review the diagram.
•
Remove all packaging materials and la out all the parts. This will give ou a
good overview and simplif assembl . Shield the assembl surface from filth and
scratching b la ing down suitable padding.
•
Check the components against the components list to make sure all are present.
Do not dispose of all packaging materials until assembl is completed.
•
Please note that there is alwa s a risk of in ur when using tools to carr out
manual tasks. Therefore, please e ercise caution when assembling this product.
•
Make sure our work environment is hazard free. For e ample, do not leave an
tools l ing around.
•
After assembling the product according to the instructions, make sure that all
screws, bolts and nuts are installed correctl and tightened.
•
f necessar , la out protective padding (not included) beneath the product to
protect our floor as there is no guarantee that, for instance, the rubber feet will not
leave marks behind.
30
