Figure 1
Figure 2
Figure 3
Figure 4
5. Select workout program P1~P12
:
In standby mode, turn UP and DOWN button to select workout program from P1
P2 to P12.
User may also press START button to start workout in P1 mode (Manual).
3-1 After select preferred program, user may press MODE to enter.
In P1 (manual mode), user shall preset TIME, DISTANCE, CALORIES and PULSE value and
press START. STOP to start workout.
Resistance level may adjust during workout by turing UP
and DOWN.
4. Operation Procedure:
4-1 Power on: Install power supply and computer will have long beep sound and display all
segments for 2 seconds, then show wheel diameter. (as figure 1)
Console will ask user to set up clock first and then enter into standby mode.
User may turn UP and DOWN button to select exercise program from P1 to P12, and press
MODE to confirm. (as figure 2 to 3)
4-2 Power off: With no signal input for over 4 minutes, LCD will off and resistance level shall return
to level 1.
Console will display CLOCK and TEMP. as figure 4.
Figure 5
- 11 -
Содержание E7000P PLUS
Страница 1: ...E7000P PLUS ...
Страница 9: ... 8 ...
