12
1-800-732-0144
WWW.SPORTDOG.COM
13
proGram tHe remote tranSmItter
The SportHunter
®
825 Remote Transmitter has seven operational modes to allow you to select the best
match for your type or style of training. The Remote Transmitter is factory set to mode 1. There is also
one programming mode: Mode V/T (Change ID Codes) on page 14.
TO CHANGE THE MODE:
1. Referring to the following table, adjust the Intensity
Dial to your desired mode.
2. Turn the Remote Transmitter over and remove the belt
clip if attached.
3. Using a pen or the tine on the buckle of your collar
strap, press and release the Mode Button. When
the Mode Button is pressed, the Transmitter Indicator
Light will be solid in color. When it is released, it will
flash the number of times for the mode selected.
For example, if mode 2 is desired, adjust the Intensity Dial to Level 2. Once the Mode Button has been
depressed, the Transmitter Indicator Light will be solid and, once the mode button is released, the
Transmitter Indicator Light will flash 2 times.
MODE UPPER BUTTON
FUNCTION
LOWER BUTTON
FUNCTION
SIDE BUTTON
FUNCTION
NUMBER OF
DOGS
1*
Continuous stimulation
(Level set by intensity dial)
OR
Vibe if V/T on Dial
Momentary stimulation
(Level set by intensity dial)
OR
Vibe if V/T on Dial
Tone only
1
2
Continuous stimulation
(Level set by intensity dial)
OR
Tone if V/T on Dial
Momentary stimulation
(Level set by intensity dial)
OR
Tone if V/T on Dial
Vibe only
1
3
Dog 1
: Continuous stimulation
(Level set by intensity dial)
OR
Tone if V/T on Dial
Dog 2
: Continuous stimulation
(Level set by intensity dial)
OR
Tone if V/T on Dial
Dog 3
: Continuous stimulation
(Level set by intensity dial)
OR
Tone if V/T on Dial
3
4
Dog 1
: Continuous stimulation
(Level set by intensity dial)
OR
Vibe if V/T on Dial
Dog 2
: Continuous stimulation
(Level set by intensity dial)
OR
Vibe if V/T on Dial
Dog 3
: Continuous stimulation
(Level set by intensity dial)
OR
Vibe if V/T on Dial
3
5
Continuous stimulation
(Level set by intensity dial)
OR
Tone if V/T on Dial
Momentary stimulation
(Level set by intensity dial)
OR
Tone if V/T on Dial
N/A
1
6
Continuous stimulation
(Level set by intensity dial)
OR
Vibe if V/T on Dial
Momentary stimulation
(Level set by intensity dial)
OR
Vibe if V/T on Dial
N/A
1
7
Continuous stimulation
(Level set by intensity dial)
OR
Tone if V/T on Dial
Momentary stimulation
(Level set by intensity dial)
OR
Tone if V/T on Dial
Locate Remote Beeper**
1
V/T
(ID CODE)
N/A
N/A
(See STEP 8)
N/A
* Factory Default Mode
** Locate Remote Beeper: The Side Button turns run mode off and locates the Remote Beeper. To enable run mode again,
press and hold the Side Button for 3 seconds.
S
TE
P
::
05
CHanGInG StImULatIon ranGeS
The SportHunter
®
825 Collar Receiver comes with 2 stimulation ranges (low and medium). There are 7 stimulation
levels within each range, with 1 being the lowest and 7 being the highest. The default range setting is 2 (medium).
To change the range of stimulation, follow these steps:
1. Make sure the Collar Receiver is off.
2. Then turn the unit on by pressing and releasing the On/Off Button.
3. After the Indicator Light turns off and within 5 seconds, press and hold the On/Off Button for 3 seconds.
4. The Collar Receiver will then beep once and the Indicator Light will flash orange. This indicates
Low
stimulation range. If
Medium
is desired, continue to hold the On/Off Button until the number of
beeps/orange flashes equals 2 as shown in the chart below.
5. Release the On/Off Button once the desired range is selected; the Collar Receiver will turn off.
6. Turn the unit back on. It will then beep according to the stimulation range selected in Step 4.
GeneraL traInInG tIpS
BEFORE TRAINING YOUR DOG WITH THIS PRODUCT:
You will have the most success using this remote trainer if you always remember to teach a command before
trying to reinforce the command with a remote trainer. We recommend that you read the enclosed Training Guide
and watch the enclosed DVD before training with this remote trainer. Your training will be easier and proceed
faster if you follow the guidelines in these teaching assistants. In addition, always keep the following training tips
in mind:
• Eliminate one misbehavior or teach one obedience command at a time. If you move too fast with the training,
your dog may become confused.
• Be consistent. Give your dog a static, tone or vibration stimulation with each misbehavior.
• Do not overcorrect your dog. Use as few stimulations as possible to train your dog.
• Restrict your dog from situations in which he has a history of misbehaving unless you can supervise him and use
the SportHunter 825 for applying static, tone or vibration stimulation.
• If you notice one situation in which your dog misbehaves repeatedly, set up this situation as a training session.
This will dramatically increase your chances of success.
• If your dog has a timid reaction to the static, tone or vibration stimulation (especially the first couple of times),
do not be alarmed. Redirect his attention to a simple and appropriate behavior (i.e. a known command, such
as “Sit”).
• Never use the SportHunter 825 to correct or eliminate any form of aggressive behavior. If your dog exhibits
such behavior, contact a professional trainer. Aggression in dogs is the result of many factors – it may be a
learned behavior or it may be brought on as a result of fear. Another factor contributing to aggression in dogs
is social dominance. Every dog is different.
At this point, your remote trainer is ready to use. The transmitter is factory set to mode 1, but you may wish to
change the mode to fit your situation. See STEP 5, for an explanation of mode options.
STIMULATION RANGE
DOG TEMPERAMENT
1 beep
Low
Mild
2 beeps
Medium
Moderate
