1-800-73-0144
Charging
Before using the NoBark 10R for the first time, be sure to charge
the unit by following the steps described below.
The NoBark 10R contains a rechargeable battery pack. When the
unit indicates that the battery is low (battery icon on the display
indicates 1 bar or less and/or the light flashes red 3 times every 5
seconds) it is time to recharge the unit.
Average battery life is 3 to 6 months, depending on how often
your dog barks. However, due to greater use during your
dog’s training, your first battery charge may not last as long.
To conserve battery life, turn the NoBark 10R off when not
in use.
Follow these steps to charge the battery:
1. Remove the NoBark 10R from your dog.
2. Plug the battery charger into a standard household receptacle.
3. Plug the other end of the battery charger into the NoBark 10R
charge port. The light will flash the sequence Green-Blue-Red
to indicate that charging has started.
4. During charging, keep the NoBark 10R in an open, well-
ventilated area. The light will flash red twice every 10 seconds
to indicate that charging is active.
5. When charging is complete, the battery charger will
automatically shut off, preventing overcharging. The light will
flash green twice every 10 seconds to indicate that charging
is complete.
Note: The battery should fully charge in less than 4 hours.
6. Remove the battery charger from the charge port. The light
will flash the sequence Red-Blue-Green to indicate the unit is
no longer charging.
7. Unplug the battery charger.
