10
1-800-732-0144
www.sportdog.com
11
Reset the Collar Receiver
To reset the Collar Receiver to work with a new Remote Transmitter or to reprogram a
new Collar Receiver to work with your existing Remote Transmitter:
A.
Turn the Collar Receiver off.
B.
Press and hold the On/Off Button. The Receiver Indicator Light will come on, then
turn off after 4-5 seconds. If the On/Off Button is released too early, the Receiver
Indicator Light will begin flashing as normal. If this occurs, start over and repeat
from
A
.
C.
After the Receiver Indicator Light has turned off, release the On/Off Button.
D.
Press and hold the Upper Button on the Remote Transmitter until the Receiver
Indicator Light flashes 5 times. You may need to hold both units - feet from each
other before this occurs. Once the Receiver Indicator Light has flashed 5 times, the
Collar Receiver has been reset and will begin flashing as normal. If the Receiver
Indicator Light does not flash 5 times, start over and repeat from
A
.
_____________________________________________________________
Program the Collar Receiver for
Three-Dog Operation
SportDOG Add-A-Dog
®
receiver(s) must be purchased to train additional dogs.
1.
Program the Remote Transmitter to mode 4 (see page 10).
2.
Program the Collar Receiver.
A.
Turn the Collar Receiver off.
B.
Press and hold the On/Off Button. The Receiver Indicator Light will come on,
then turn off in 4-5 seconds. If the On/Off Button is released too early, the Receiver
Indicator Light will begin its normal flashing. If this occurs, start over and repeat
from
A
.
C.
After the Receiver Indicator Light has turned off, release the On/Off Button.
D.
Press and hold the
Side Button
on the Remote Transmitter until the Receiver
Indicator Light flashes 5 times. You may need to hold both units - feet from each
other. If the Receiver Indicator Light does not flash 5 times, start over and repeat
from
A
.
Step
6
Step
7
