4
Turning On the Locator-
Choose between the features and adjust the switches
accordingly. Make sure the LO-HI switch is set to the
LO position for fi rst time use. Then tighten the lid snugly
to ensure the lid is watertight. Please match the “+” and
“-“ polarity on the battery to the super imposed symbols
on the outside of the battery compartment. Insert the
battery into the case and tighten the lid. Please note that
the battery lid has an additional feature that allows it to be
used as an ON/OFF switch. Turn the lid until it begins to
get diffi cult to turn. Then align the dot to either the ON
or OFF position as seen in the pictures below. In order
to test the unit, turn the dot to align in the ON position,
and hold the unit motionless for 2 seconds. The unit
should then begin to beep in the point mode. The battery
lid is waterproof in both the ON and OFF position. This
feature was designed to allow the hunter to easily turn the
unit off in the fi eld without having to remove the collar.
Off
On
