©2005 KT Sports
FIG. 4
FIG. 4A
12V
DC
AD
AP
TO
R
100
0 m
A 2
5W
47
37
44
14
20
= 3.5 X 25 MM
HOME
44
48
17
20
25
51
19
17
English
English
English - 6
HOLD TABLE
CABINET
DO NOT
HOLD THE
LEGS
DO NOT LEAN THE
TABLE ON ITS LEGS!
FIG. 4
13) Attach the two Slide Scorer Assemblies (#19) on top of the side rails using two (#20) Screws per scorer
as shown Fig. 4. Pilot holes show the proper screw placement.
14). Install the Adjustable Goals (#17) by placing them into the pre-installed Adjustable Goal Anchors (#52).
See Fig.4
15) Plug the 12 DC Adaptor (#47) power cord into to the Control Box (#44). See Fig. 4A.
16) Plug the power cord into the power source, push the on/off switch (#48). You are now ready to play.
CAUTION:
Two strong adults are recommended to turn
the table over as shown.
1. Lift the table off the ground.
2. Turn the table over.
3. Place it on all four feet at the same time on the ground.
12) Lift the table assembly from the floor with two strong adults, turn it over, and set table on its legs in
the
location where you will play. Go back and make sure that all connections are tight.
CONTROL
BOX
CONTROL
WIRE
