4
14. STRIKE:
The STRIKE button increases the STRIKEs count by one.
15. EDIT:
The EDIT button is used to edit the INNINGS count.
COMMUNICATION CABLES
Connecting a Hard Wired Cable
•
Using the supplied 20-ft. DIN cable, connect one end to either of the DIN sockets on back of
the controller and the other end to the junction box receptacle.
NOTE: When POWER is turned ON to the scoreboard, it will momentarily display the code for
the sport the scoreboard is ready to display in the HOME TEAM SCORE Section’s far right
digit, or, the one’s position. This code only shows for about three seconds and then changes
to the default 0 (zero) score. The code for baseball is “5”. In the event the scoreboard does
not display a “5” at start-up, follow the directions for changing GAME MODES in the
instructions below.
GETTING STARTED
Begin by making sure the Game Insert that came with your scoreboard is in the sleeve on the face of
the controller, as in the image below.
Cable – Back of Controller
Cable – Junction Box Receptacle
