5
CHANGING GAME MODES:
When initially powering the scoreboard, pay attention to the far right digit of the HOME score
(ones position). It should display a 5 (this indicates baseball) for a few seconds and then
change to a 0 (zero). If it does not, press the SELECT GAME button for three (3) seconds and
then press the Inning button (button #5 on the keypad). To store the selection press the Out
button (button #9). Next, press the NEW GAME button to begin game-play.
STARTING A NEW GAME:
At power-up, the scoreboard is ready for game play. In the event you need to begin again or
start a new game, simply press and hold the NEW GAME button for three seconds. This will
clear the information from the scoreboard and display the start-up values of zero (0) in both
scores, a one (1) in the Period, and no balls, strikes, or outs.
CHANGING HOME SCORE:
To increase the HOME score by one, press the HOME SCORE key on the keypad. To
decrease the HOME score by one press the “red” -1 HOME key on the left side of the keypad.
CHANGING GUEST SCORE:
To increase the GUEST score by one, press the GUEST SCORE key on the keypad. To
decrease the GUEST score by one press the “red” -1 GUEST key on the left side of the
keypad.
CHANGING INNINGS:
To increase INNING by one press the INNING key.
EDIT INNINGS:
To edit the INNINGS, press the EDIT key quickly followed by the INNING key, this will only
decrease the INNING by (1) one each time.
CHANGING BALLS AND STRIKES:
To change BALLS or STRIKES, press the respective keys on the keypad. If you enter more
BALLS or STRIKES than you intended, simply press the respective keys on the keypad to
cycle back to the correct number of either BALLS or STRIKES.
CHANGING OUTS:
To change OUTS, press the OUT key on the keypad. The third OUT will clear the BALLS and
