12
c) Preparation of net hoop assembly: Place net hoops on frame construction.
Check correct position of right and left hoop (see picture bottom mid)
Fixing of net hoop at the top:
Push nuts (position angle crossbar/upright) already
provided in the upright below the slotted plate of the net hoop (see picture
bottom left). Stick 2 washers DIN 9021, DIN 912, Ø 7.4 mm on 2 hexagon socket
cylinder screws DIN 912, M6 x 20 and then screw the net hoop in the nuts (see
picture bottom right and mid).
Slot to the frame inside.
Correct position of right and
left hoop.
net hoop
bar of frame
