14
3
.
Assembly of the net:
Make sure that the groove of the goal is clean and all packing material or other
material is removed so that the assembly is possible without any problems.
Now fix and adjust the net rope in the groove. Then stick net holders with its
clips into the groove and fix them with a 90° rotation. Fixing is either possible
manually, with the key for hexagon socket screws or with a pliers (see bottom
pictures). Distribute net holders equally (same distances).
We recommend the following distribution of net holders:
Crossbar/ground tube
: 7 pieces each
Upright
: 5 pieces each
Ground bar
: 5 pieces each
Use all the other included net holders for corners and other connections.
Pull the cord through each net meshes and fix it on both net hoops, if necessary
lead it through the bore in the net hoop.
Dismantling of the net is also done by rotation of the net holders through 90
degrees.
4. Ground fixing:
The ground bars are equipped with boreholes of 25 mm which serve to fix the
special anchoring systems for the goal. Different systems are available (
see
Sport-Thieme
accessories
).
The anchoring system is not part of the delivery. The use of the goal without
corresponding anchoring system is at your own risk.
