Instruction Manual
for prod. code 251 0620
Version 08/2022 |
page 8
Assembly step 1
-
Make sure the volume control is turned anticlockwise to
–
(minus) and the On/Off switch is set to
“Off”
Fig. 3:
Amplifier in switched-off state
-
First
– depending on the input of your audio device – connect the audio adapter cable
④
or the RCA connector
cable
⑦
to the amplifier
②
. To do this, plug the end if the red cable cable into the amplifiers red port and the
end of the the white cable into the white. Th other cables are then no longer required.
Fig. 4:
RCA connector cable connected with the amplifier
Assembly Step 2
-
Loosen the screw caps on the amplifier
②
until there is a gap. Now insert the pin plugs
⑤
into the
corresponding, coloured screw caps (see fig 5). Then retighten the connections so the pin plugs are
clamped in.
Fig. 5:
Connecting the cables to the screw connections
