9
c) Assembly of caps: Stick caps in the open ends of uprights (see picture bottom
left). Bore them with drill 1.5 mm through the holes provided in the uprights.
Then fix plug pins with a hammer/mallet (see picture bottom right).
3. Assembly of the net:
The net is not part of the delivery.
Make sure that the groove of the goal is clean and all packing material or other
material is removed so that the assembly is possible without any problems.
Now fix and adjust the net rope in the groove. Then stick net holders with its clips
into the groove and fix them with a 90° rotation. Fixing is either possible manually,
with the key for hexagon socket screws or with a pliers (see bottom pictures).
Distribute net holders equally (same distances).
We recommend the following distribution of net holders:
crossbar
:
13 pieces (net holder black)
upright
: each 9 pieces (net holder black)
corner upright/crossbar
: each 2 pieces (net holder orange)
Use all the other included net holders for the other connections.
To fix net holder
in the corner (upright/crossbar) use the orange net holders.
Pull the cord through each net meshes and fix it outside in the background
Dismantling of the net is also done by rotation of the net holders through 90 degrees.
