Sponge-Jet 35E, Руководство пользователя, Страница: 6 / 19

BASIC COMPONENTS
(CONTINUED)
Figure A: Sieve Assembly
1 Hopper
2 Flat Gasket
3 Large Particle Downspout
Oversized particles that cannot pass through top screen are discharged through
Large Particle Downspout.
4 Top Screen
Stainless Steel mesh screen used to separate oversized items larger than Sponge
Media particle from reusable Sponge Media.
(See section 7.5 Sieve Assembly, for proper screen installation)
5 Reusable Media Downspout
Particles that do not fall through Bottom Screen are discharged through Reusable
Media Downspout.
6 Bottom Screen
Stainless Steel mesh screen used to separate undersized material (normally con-
sidered waste) from reusable Sponge Media abrasive.
(See section 7.5 Sieve Assembly, for proper screen installation)
7 Fine Particle Downspout
Particles that fall through bottom screen are discharged through Fine Particle
Downspout.
8 Shallow Funnel
Located under the Bottom Screen, the shallow funnel collects and directs fine particu-
late
(waste) into Fine Particle Downspout.
Figure B: Vibratory Portion and Lower Base Assembly
1 Flywheel
Vibratory energy generated directly by Flywheel is transmitted to Sieve Assembly.
2 Vibratory Portion
Is located over Lower Base Assembly and supports Sieve Assembly.
3 Suspension Rod
Vibratory Portion is located over Lower Base Assembly and supports Sieve Assem-
bly.
4 Weight
This off center weight causes upper the eccentric Flywheel to move media across
screen.
5 Side Cover
This removable cover serves as protection for the components located inside the
Lower Base Assembly.
6 Lower Base Assembly
Supports Main Controls, Air Motor, Vibratory Portion and Sieve Assembly.
7 Flexible Coupling
Absorbs startup torque from electric motor and passes that energy up through
Vibratory Portion.
1
3
5
6
7
2
2
4
2
2
8
6
| SPONGE-JET 35E 50E USER MANUAL
2
3
4
5
1
7
6