Spon NAS-8514, Руководство пользователя

Страница: 8 / 9

IP Network Intercom Terminal User Manual
t a computer is only corresponding to one target terminal.
3. The factory default terminal ID number is 1, the equipment IP address is 192.168.1.101, server IP address is 192.1
68.1.13.
Basic Function
Initiate Intercom
1). Click
【
TALK
】
button to enter the called terminal No. ,then click
【
OK
】
button to call;
2). Click
【
CALL
】
button to call the system designated call terminal directly;
After completing above operation, the terminal will play waiting sound waiting for the answer if the called terminal is free, the
called terminal will play vibration ringtone; The terminal will play busy tone if the called terminal is busy or refuse to answer.
Note: The default called ID is 001 terminal. It can set multiple calling objects, it will transfer to call another object
automatically when the called object is busy.
Receive Intercom
When there is incoming call, then click
【
OK
】
button
、 【
CALL
】
button or
【
TALK
】
button to receive the call request and make
the conversation with the terminal; click
【
C
】
button to reject.
Real-time broadcasting
Press
【
BC
】
or
【
PTT
】
button and click the numbers button to choose the zones, then press
【
OK
】
button to broadcasting
to the specified zones.
Malfunction Test
Why scanning tools can’t find the terminal?
1. It`s required to close all firewalls or with data interception function software before open the software server.
2. Network card not compatible with terminal.
3. Using other computer to scan the machine.
Why the terminal always shows "offline"?
1).Check the software server and the main controller is normal opened or not. It`s required to close all firewall before open the
software server (including system built-in firewall and other antivirus software firewall).
2).Check the network connection is normal or not. after the terminal powered on, the network port green light is norm on,
meantime the orange light will be short and fast flash, it means the network cable connect normal. If the network port green
light is not on, it means the network hardware connection problem, please check the network cable and switcher of terminal
whether they work normal, damaged and disconnect or not etc.
3).Check the terminal’s IP setting. Please check the terminal ID, sever IP, local IP, gateway IP etc parameters.
Why it appear "terminal network services (UDP) start fail" warning in the process of start services software?
It’s usually the local server network connection has been disconnected, please connect the local network cable well and exit
the software, then restart it.
6