Spokey 926743, Руководство пользователя

Страница: 38 / 76

17
10. Adjusting the brake disc
.
If you feel the brakes are too tight, use the M5 hex wrench counterclockwise to
release the plate screws on the disc, slightly shorten the tail brakes cable then lock it
up with plate screws; If you feel the brakes are too loose, release the plate screws and
slightly extend the tail brakes cable to the tail side and tighten the screws again.
. 11. Adjusting the front bar
If the front bar is shaking, use the M5 hex wrench to lock the two screws at the folding
mechanism.