DRAFT
Spohn & Burkhardt
GmbH & Co. KG, Mauergasse 5 89143, Blaubeuren Germany, Web: www.spobu.de, Mail: [email protected]
Installation instructions – USB-Module ESS160
1500
USB 2.0
10
Ø 4,5
11
73
56
63 73
(
2
)
(
1
)
(
3
)
(
2
)
X2.1
X2.2
X2.3
X2.4
X2.5
X2.6
X2.7
X2.8
X2.9
X2.10
X2.11
X2.12
X2.13
X2.14
X2.15
X2.16
X2.17
X2.18
X2.19
X2.20
DI 1
DI 2
DI 3
DI 4
DI 5
DI 6
DI 7
DI 8
DI 9
DI 10
DI 11
DI 12
DI 13
DI 14
DI 15
DI 16
DI 17
DI 18
DI 19
GND
X2
(digital in)
X1.1
X1.2
X1.3
X1.4
X1.5
X1.6
X1.7
X1.8
X1.9
X1.10
X1.11
X1.12
DC 5 V
GND
AI 1
AI 2
DC 5 V
GND
AI 3
AI 4
n. c.
n. c.
n. c.
n. c.
X1
(analog in)
1. Safety
The USB module ESS160 (
1
) is used as part of an overall system or
machine. It is the responsibility of the operating organization to en-
sure safe, correct overall function.
The manufacturer will not accept
any liability
for damage due to
abnormal use, or unauthorized modifications to the device that
cause injuries or damage.
All tasks on the device, as well as the integration of the device into
systems and machines, are only allowed to be undertaken by trai-
ned specialist personnel authorized and trained by the operating
organization.
Only specialist personnel who, due to their training and knowledge,
are able to undertake the necessary tasks are allowed to be autho-
rized.
2. Description
The USB module ESS160 (
1
) is a compact, encapsulated USB modu-
le for the simple connection of digital and analog signals (e.g. from
joysticks, command devices, …) to a PC operating system. Areas of
application include joysticks, command devices in remote control
stands, simulators and camera controls. The USB module ESS160 (
1
)
has a double-deck pin header X1 for 4 analog Inputs and a double-
deck pin header X2 for 19 digital inputs. The connection to the PC
is made with a 1.5 m long connecting cable with USB-A connector.
3. Technical data
Supply via USB
4,5 V … 5,5 V DC
Temperature range
-15° C to +75° C
Degree of protection IP
Housing waterproof encapsulated,
double-deck pin header IP 00
EMC
EN 61000-6-2, EN 61000-6-3
Electrical load in total
Digital IN (X2)
Analog IN (X1)
max. 30 mA
max. 50 mA
System requirements
Windows 7, Windows 10, Linux
X1
4 x analog IN
X2
19 x digital IN
4. Pin assignment
see Figure 2. „Pin assignment“
5. Mechanical installation
1.
Position the USB module ESS160 (
1
) in the installation location
and fasten the USB module ESS160 (
1
) using 2 suitable screws
through the fastening flaps (
2
).
6. Electrical installation
1.
Connect the device (joystick/command device) to connec-
tions X1 and X2,
see Figure 2. „Pin assignment“
.
2.
Connect the USB module ESS160 (
1
) with the USB connecting
cable (
3
) to a PC.
7. Set up
The USB module ESS160 (
1
) is ready for use after connection to the
PC.
The USB module ESS160 (
1
) is automatically detected and logs on
to the PC with “USB module SpoBu“.
For the following steps see also Figure 3 „Set up“.
1.
Enter „USB“ in the text field of the Windows search function.
2.
Select „Set Up USB Game Controller“.
3.
In the following window, select „USB module SPOBU“ in the
list and click on „Properties“.
4.
The following functions are now available in the following
window:
a. „Testing“
Here you can test the functions of the digital and analog
inputs.
b. „Settings“
Here you can calibrate the analog inputs. Select „Calibrate“
and follow the instructions.
5.
Now you can test the function of the device.
8. Servicing
The USB module ESS160 (
1
) is maintenance-free.
9. Repair
Repair by the operating organization is not intended. Please send
faulty devices to Spohn & Burkhardt GmbH & Co. KG
.
10. Removal
Disconnect electrical connections
Note the shutdown conditions for the overall system!
1.
Disconnect the USB connection cable (
3
) from the PC.
2.
Disconnect the cables from connections X1 and X2.
Mechanical removal
3.
Undo the 2 fastening screws from the fastening flaps (
2
) and
remove the USB module ESS160 (
1
) out of the installation
space.
11. Disposal
The USB module ESS160 is to be disposed of as per the national and
international laws and regulations.
12. Reference documents
Declaration of conformity
Translation of the german original – 01/2020
Figure 1. Overview/Dimension drawing (Dimensions in mm)
Figure 2. Pin assignment
Figure 3. Set up
