4.
Assembling
:
dimensions of the boreholes:
5. BIOS:
Power on the computer and the system will start POST (Power On Self Test) process. When the message below
appears on the screen, press „
DEL
“ to enter Setup.
To save the BIOS settings press „
F10
“.
Short description of some BIOS settings:
5.1. Wake On RTC:
That allow a computer to 'wake up' after shut down to execute tasks every day or on a
certain day.
-> Power-> Wake up on Alarm
5.2. Restore on AC Power Loss:
This setting specifies whether your system will reboot after a power failure or
interrupt occurs.
-> Power-> Restore on AC Power Loss
[[Power Off]
Leaves the computer in the power off state.
[Power ON]
Leaves the computer in the power on state.
[Last State]
Restores the system to the previous status before power failure or interrupt occurred.
5.3. pxe-Boot:
boot an OS via LAN and DHCP
. -> Feature -> Onboard Device Control -> Launch PXE Option Rom
Mount the kit on the backside of the
KUMO IV with four screws.
