Set your EV charger or EV to a maximum charge rate of 24 amps for EV chargers using NEMA 14-50
connectors.
This product is not intended for use with NEMA or other plug adapters.
Includes 1-year limited warranty
(optional extended warranties are available)
Splitvolt, Inc. warrants that this product shall be free from defects in material, workmanship and assembly,
under normal use, in accordance with the specifications and warnings, for a period of one year from the
date of purchase. This warranty does not cover damages as a result of an accident; resulting from the use or
misuse of parts not manufactured or sold by Splitvolt, Inc; or resulting from modification of the Splitvolt
Splitter Switch.
These warranties extend only to the original purchaser of the product and are non-transferable. To exercise
your rights under this warranty, you must provide proof of purchase in the form of an original sales receipt
that shows the product name, model number, amount paid, payment method, and date of purchase. These
warranties apply only to original purchasers of Splitvolt Splitter Switch for personal, family, or household
use, not to commercial, institutional, or industrial purchasers.
These warranties are valid only in the United States. In no event shall Splitvolt, Inc. be liable for any direct,
indirect, incidental, special, consequential, or multiple damages arising out of the use or misuse of the
Splitvolt Splitter Switch devices.
Troubleshooting
The following table identifies steps for troubleshooting the operation of the device. If you
are experiencing difficulty, please review the table below, check our website
(
www.splitvolt.com
), and then contact us at www.splitvolt.com/help if you are still unable to
resolve or have additional questions.
Issue
Resolution
Splitter Switch’s LED and LCD
are not turning on
Is power available?
1.
Check that the wall socket has power
2.
Check that the wall plug is plugged in fully
3.
Check that the built-in breaker is in ON position
The wall socket seems to be
upside down
There is no universal orientation for NEMA plugs, so yours could be
upside down. Just plug it in anyway.
The pins on the cable do not
match my wall socket
It is possible that the wrong model was ordered. Please
contact
www.splitvolt.com/help
for assistance.
Not getting power from either
one of the sockets
Double-check all plugs are pushed in completely. Note that the “EV”
socket will not have power when the “Dryer” socket is active.
Splitter switch is not turning off
the EV Socket when dryer is
running
1.
Turn Off/On the internal circuit breaker switch and verify
whether this corrected the issue.
2.
Check your house power panel for a partially tripped circuit
breaker by turning On/Off the appropriate breaker, verify.
3.
Confirm what type of dryer you have. If you have a gas line
running into the dryer, you have a gas dryer (even if it is plugged
into a NEMA 10-30 or NEMA 14-30 plug).
4.
Turn off energy saver mode on your dryer. Does the splitter
switch turn off the EV socket? If so, you have a rare
7
Splitvolt, Inc.
