Split-fire 4090 Скачать руководство пользователя страница 17 | Manualshive

Страница: 17 / 49

Split-fire 4090 Скачать руководство пользователя страница 17

4090 Woodchipper
Owners Manual

Safety

17

✓

New users may operate this machine in a clear, unobstructed

area under the supervision of an experienced operator, only after
they have read and understand the owner’s manual.

✓

Only allow

responsible adults who have read the owner’s manual

and are familiar with the controls to operate the woodchipper.

✓

Inspect your machine each time before use. Special attention

should be taken that all components are in place, damaged or
missing parts are replaced, and that all the safety decals
highlighted in the safety labels section are in place and visible on
the machine.

✓

Only one person may operate the machine at any time. More than

one operator greatly increases the chance of personal injury or
death.

x Never leave machine unattended while running.

x Never operate the machine when under the influence of alcohol

or drugs.

x Do not alter, add accessories, or attachements to your

woodchipper without the approval of the manufacturer. Doing so
without the manufa

cturer’s approval WILL VOID THE

WARRANTY. If attachments have been added with approval of
the manufacturer, be sure to keep safety labels visible.

✓

Your machine is designed to chip wood only! Stones, metal,

gravel, and other foreign objects will cause damage to the
machine and will increase the chance of personal injury or death.

✓

Always wear proper PPE before working on the worksite and

before starting and operating your 4090 woodchipper. Proper
PPE must include, but not limited to

– Eye Protection, Ear

Protection, Foot Protection, Hand Protection.

«
...
15
16
17
18
19
...
»

Содержание 4090


















































Отзывы:

Нет отзывов