Split-fire 2265, Руководство пользователя

Страница: 30 / 39

2265 Log Splitter
Service & Maintenance
Owners Manual
30
Slide pad wear will occur over time and can be checked by slider
“play”. Slide can be checked by measuring the movement on the top
of the knife. The “play” can be measured by completing the following
steps.
1. Move the knife to the middle of the stoke. Equal distance
between the front and back stop.
2. Utilize a rubber mallet hammer to hit the knife to the farthest
left.
3. Use a flat edge (Ruler, Level, etc.) against the side of the
frame in a vertical position to use as a measuring point.
4. Measure the distance between the flat edge and the top of the
knife.
5. Utilize a rubber mallet hammer to hit the knife to the farthest
right.
6. Place the flat edge in the same position and remeasure the
distance between the flat edge and the knife.
7. If 3/8” “play” is observed, the slide pads need replacement.
Contact your local dealer or Split-Fire Sales Inc. for slide pad kit
pricing and availability.
4.23 Tires, Lights & Hitch
Tires, Lights, and the Hitch must be inspected periodically for safety
and reliability. This in-depth inspection must occur every 150 hours
during hydraulic system maintenance.
Tires – must be inflated properly to 22-26 lbs of air pressure. If the
tires are over inflated, dangerous bouncing may occur when towing.
Wheel bearing and tire straightness must also be inspected. Raise
the axle and place on a block/raised surface. Verify that the wheel
spins with ease and the rim runs straight and true. If any wheel “play”
is observed, the grease cap must be removed, and wheel nut be
retightened to remove wheel “play”. If any broken or worn out parts
are found, all parts can be found in the parts breakdown or by calling
your local dealer or Split-Fire Sales Inc.