1. Water Proof Speakers
2. CHARGING indicator LED
3. Liquid Crystal Display
4. PAIRING indicator LED
5. Rubber Terminal Cover
6. USB Charging Port
7. Auxillary (AUX) Input socket
8. USB Socket for MP3 Playback
9.Function Key panel
10. Bass (up) Key
11. Bass (down) Key
12. Volume (up) Key
13. Volume (down) Key
14. Treble (up) Key
15. Treble (down) Key
16. Power Key (On/ Standby)
17. Back/ Tune Key
18. Play/ Pause/ Pair Key
19. Next/ Tune Key
20. Function Key
21. 10 Key (skip ahead 10 songs)
22. P-Mode (Play Mode)/ FM Mode Key
23. Stop/ Program Key
24. MEM / Folder Key
25. MEM / Folder Key
26. Telescopic antenna
27. DC Input socket (Micro USB)
LOCATION OF CONTROLS
E-3
Rechargeable battery:
27
26
- This unit operates on an internal rechargeable Lithium-ion battery.
- It can be recharged from any standard USB port (eg. PC USB port.)
- It can be also recharged with the provided Micro-USB AC charger.
(Note: AC Charger is NOT waterproof)
- Please ensure your country’s AC-voltage is within the charger’s voltage range.
- Insert the micro USB plug of the AC charger into the Micro USB Socket at the back of the unit.
- Plug the AC charger into an AC wall outlet. (CAUTION: Never expose unit to water during charging)
- The CHARGE indicator light will be ON while charging is in process.
- Once the unit has been charged, it can simply be unplugged and taken anywhere to be used.
- Total play time when fully charged is upto 10 hours, depending on the type of music played
and the loudness level.
! IMPORTANT: PLEASE FULLY CHARGE THE UNIT BEFORE FIRST USE !
FOR BEST RESULTS, ALWAYS RECHARGE THE UNIT FULLY BEFORE USING IT.
IF THE BATTERY IS FULLY DRAINED, PLEASE ALLOW IT TO RECHARGE FOR A FEW HOURS BEFORE USE.
Enlarge view of the
Function key panel:
1
2
3
4
10
1
6
7
11
12
14
13
15
16 17 18 19 20
21 22 23 24 25
- THE RECHARGEABLE BATTERY HAS A LIMITED LIFESPAN. ITS CAPACITY DECREASES GRADUALLY
WITH THE FREQUENCY OF USE AND THE PASSAGE OF TIME.
- THE LIFESPAN OF THE RECHARGEABLE BATTERY VARIES ACCORDING TO HOW IT IS STORED,
USAGE CONDITIONS AND USAGE ENVIRONMENT.
8
5
9
NOTE:
- DURING RADIO MODE, THE UNIT WILL NOT CHARGE, AS THIS CAUSES INTERFERENCE TO
THE RADIO SIGNAL.
OR SHORT-CIRCUIT.
- NEVER RECHARGE THE UNIT WHILE IT IS WET, MAY CAUSE FIRE OR DAMAGE DUE TO ELECTRIC SHOCK
E-4
OPERATION
SOUND CONTROL:
IMPORTANT: If there is NO sound, ensure the volume on both devices is not set to 0.
Bluetooth®
WIRELESS PLAYBACK (A2DP Audio Streaming)
- This unit can wirelessly playback audio from any device with Bluetooth A2DP function.
- The wireless range is approximately within 10m (30Ft.)
- Simply pair your device (eg. Smartphone) to this unit to enjoy Wireless Audio Streaming.
- In order to avoid interferences, please de-activate Wi-Fi on your device (smartphone, tablet, etc.)
when playing music using
Bluetooth
®.
How to pair your device to this unit:
- Make sure Bluetooth is switch ON in your Device (Smartphone/ Tablet).
- Switch on the boombox, and press “FUNCTION” key repeatedly until display shows BT symbol.
- The PAIRING LED light will indicate the Bluetooth Status of the unit:
- To force the unit to go into "SEARCHING" mode, Press and Hold the "PAIR" key for 2 seconds
until the "BLUE PAIRING LED" begins flashing slowly.
- Once the PAIRING LED Indicator begins flashing, you will find the unit listed in the Bluetooth
connection list of your device (eg. In your Smartphone or Tablet).
- Make connection on your device (eg. Press “CONNECT”).
- If asked for a pass code, enter “0000”.
- This is one-time event per device. To pair your unit with another device, please repeat the
above steps. The unit remembers up to 6 devices.
- There is no need to repeat this pairing procedure for up to 6 devices, even if unit is
powered off.
- The unit will also automatically pair with the LAST paired device if it is found when the unit
is powered ON and switched to
Bluetooth®
mode.
- Note that only one device can be paired at any given time, but the unit will remember up to
6 devices in memory.
Searching
LED flashes slowly
Pairing
LED blinks faster
Connected
LED stays on
STATUS
PAIRING LED LIGHT
FUNCTION KEY
Pressing the FUNCTION Key repeatedly will allow you to select one of the different source modes,
as follows :
BT
FM
USB
AUX
Bluetooth
Radio
MP3
player
Input
Jack
- Use the (up) and - (down) keys to adjust loudness to the desired level.
- On
Bluetooth
® and AUX modes, loudness can sometimes ALSO be adjusted using
the volume controls of the externally connected device (eg. Tablet or Smartphone).
It's advisable to set that to 90% (about 10% less than maximum) and then to use
the volume controls on the boombox only.
- If sound is distorted, reduce the volume level of the external device until it is normal.
- Sometimes there may be a slight clicking sound coming through the speakers when
adjusting the volume control, especially when listening to the FM Radio. This is a normal
condition, and temporary.
- Use the BASS and TREBLE controls (+/-) to adjust to the LOW and HIGH frequencies
to your taste.
