9.White balance:
auto/sunny/cloudy/tungsten/fluorescent
Here you can set the image white balance mode to improve color balance
in videos/images in different weather and lighting conditions. Auto is
recommended to fit most conditions.
10.EV:
-2.0/-1.7/-1.3/-1.0/-0.7/-0.3/0/+0.3/+0.7/+1.0/+1.3/+1.7/+2.0
Here you can manually adjust the Exposure Values to improve the image
brightness.
11.Recycle:
off/1 min/3 mins/ 5 mins
The video and data is stored on the memory card, this can either be a
continuous recording or a segmented loop recording of 1min, 3 mins or 5
mins blocks.
When "off" is chosen, the videos recording will continue until the card
space is full. Once the memory is full a "card full" message will be
displayed on screen and recording will stop. Please be aware that the
maximum video file size is 4GB.
When "1 min/3 mins/ 5 mins" is chosen, the dash camera will record in
segment specified by the loop tome interval selected. Once the memory
is full the oldest file will be overwritten with the new recording (unless the
files are locked).
12.Motion detection:
off/low/meddle/high
Motion detection is used to reduce the amount of storage space used.
When there isn’t obvious motion detected the camera will switch to
standby. Once motion over the threshold value is detected, the camera
will start recording and continue until 15 seconds after the motion stops.
Here you can set the detection sensitivity.
13.Time setup:
The date/time information will be automatically updated if the GPS
satellites are connected. You can set the system time manually.
6
