SPL Stereo Vitalizer Jack 9530, Руководство пользователя, Страница: 6 / 14

6
When patching the Stereo Vitalizer Jack into the sub-groups or
master-breaks of the console, note if the master breaks are swit-
ched »pre« or »post« fader. They should best be switched »pre«
fader, so that a variation of the master fader does not affect the
input level of the Stereo Vitalizer Jack. The effect level and the
treated sound will then remain unchanged.
2. Another popular stereo application is the processing of
existing master tapes during post-production such as when
reprocessing archive material for CD release.
If a single-ended noise reduction system is used to clean up the
original, the Stereo Vitalizer Jack can make a significant contribu-
tion in restoring the high end detail that invariably suffers during
such treatment. In many cases, the restored master can be made
to sound appreciably better than the original.
3.When electronic music is produced, the Stereo Vitalizer Jack
can be used to add new range and depth to samplers and synthe-
sizers and also to further process existing effects such as delay
and reverberation. Even budget instruments and processors with
limited audio bandwidths can be made sound full-bodied and
detailed.
If you want to use a compressor in the master chain after the
console, use your Stereo Vitalizer Jack after the compressor. You
can then be sure that the Stereo Vitalizer Jack will receive a level-
corrected signal which helps to operate even more precise. If you
use the Stereo Vitalizer Jack before the compressor negative side-
effects such as pumping could be more audible.
Applications
Application 2
The Stereo Vitalizer Jack
inserted between noise-
reduction and recorder to
improve archived recordings
Application 3
The Stereo Vitalizer Jack
inserted between compressor
und recorder