10
RackPack 4
Please Note
Fitting and/or exchanging modules should only be done by qualified persons. In the light of
possible physical damage or injuries any manipulation is at your own risk. SPL is not liable
for any physical damage or injury.
Before opening the device please read all security advices
(pages 4 and 5) and the “Hook Up” information (pages 7 and 8).
If the device is already in use and you want to expand it with further modules: Turn off the
device before you open it, disconnect any power and signal connections and wait at least five
minutes to make sure no residual current is left.
This instruction explains how to fit a module into the third slot. In this example, modules have
already been fitted into slot #1 and #2.
You will need the following tools: a Phillips screwdriver and a 4 mm Allen key (the Allen key is
part of the scope of delivery of the RackPack frame).
Step 1 (Top View)
Unscrew all 12 Phillips screws which fix the top panel with the Phillips screwdriver and remove
the top panel.
Fitting Modules
Step 1