30
Standard headphone output
Warning: Never connect a mono jack cable to the standard headphone output (front panel stereo jack).
Make sure that the stereo jack is fully inserted, otherwise a short circuit might damage the headphone
amplifier!
• 6.35 mm TRS connector
• Pin wiring: Tip = Left, ring = right, sleeve = GND
• Impedance: 0.18 ohm
• Attenuation factor: 180 @ 40 ohms
• Frequency range: 10 Hz to 300 kHz ( -3 dB)
• Crosstalk at 1 kHz: -90 dB
• THD & N: 0.00091% (at 0 dBu, 1 kHz, 100 kohms load)
• Noise (A-weighted): -103 dB
• Dynamic range: 135.5 dB
Max. Output power (at +30 dBu @ 1 kHz)
• 2 x 1 W at 600 Ohm impedance
• 2 x 2 W at 300 Ohm impedance
• 2x 3.7 W at 120 Ohm impedance
• 2x 2.9 W at 47 Ohm impedance
• 2x 2.7 W at 32 Ohm impedance
I
F R B
