21
Specifications
Outputs
Standard headphone output
Warning: Never connect a mono jack cable to the standard headphone output (front panel stereo jack).
Make sure that the stereo jack is fully inserted, otherwise a short circuit might damage the headphone
amplifier!
• 6.35 mm TRS connector
• Pin wiring: Tip = Left, ring = right, sleeve = GND
• Source impedance: 0.18 ohm
• Damping factor (40 Ω): 180
• Frequency range ( -3 dB): 10 Hz to 300 kHz
• Crosstalk (1 kHz): -90 dB
• THD & N (10 Hz – 22 kHz, 0 dBu): 0.00091%
• Noise (A-weighted): -103 dB
• Output power (1 kHz, 1% THD, 600 Ω): 2 x 2.7 W
• Output power (1 kHz, 1% THD, 300 Ω): 2 x 5 W
• Output power (1 kHz, 1% THD, 32 Ω): 2 x 1 W
• Dynamic range: 135.5 dB
I
F R B
