Phonitor e – Quickstart
Phonitor e – Quickstart
6
7
Phonitor e
Serial
Number
Voltage Selection:
1. Remove Fuse Holder
2. Exchange Fuses
3. Flip Over
4. Reinstall
Fuses:
230 V: T 500 mA L 250V
115 V: T 1 A L 250V
~115 V AC/~230 V AC,
50 Hz/60 Hz, P max. 30 W
Made in Germany
ON BOTTOM SIDE:
DIP SWITCHES 1 ON: 22dBu
2 ON: RCA -10dBV to 0dBu
RISK OF ELECTRIC SHOCK
D O N O T O P E N
C A U T I O N
RISQUE DE CHOC ÉLECTRIQUE
N E PA S O U V R I R
AT T E N T I O N
ANALOG SOURCES
DIGITAL SOURCES
L
R
USB
OPTICAL
COAX
PGM
VO
LU
M
E
Refer to
Manual
IR
Pin 2 +
L
R
VOLTAiR
120V DC Audio Rail
SOURCE
Digital
RCA
XLR
DIGITAL
Coaxial
Balanced
IR
Standard
Optical
USB
Phonitor e
Headphone Amplifier
C1
C2
Off
MATRIX
VOLUME
ON
Phonitor Matrix settings
With the MATRIX switch you can activate or deactivate (Off) two of the most
common Phonitor Matrix settings. While the angle is set to 30° (standard
speaker placement) you can set two different crossfeed settings (C1 or C2).
The Phonitor Matrix creates a speaker-like listening experience on headphones. When listening to speakers sound
coming from one side is also perceived with the ear on the opposite side. The Phonitor Matrix calculates the time
and level differences with their specific frequency responses to deliver a true rendition of a speaker playback.
Learn IR remote control
The volume potentiometer of the Phonitor e is motorized and can be operated
by any infrared (IR) remote control. Press the IR PGM VOLUME button (infrared
programmable volume).
Power LED now lights up brighter.
Point your remote control towards the IR receiver and push the button you wish
to use to
lower
the volume. The Power LED lights up once per push. Press the
same button repeatedly until the Power LED lights up three times within a short
interval – programming of this button is then completed.
Point your remote control towards the IR receiver and push the button you wish
to use to
increase
the volume. The Power LED lights up once per push. Press
the same button repeatedly until the Power LED lights up three times within a
short interval – programming of this button is then completed.
Learn mode ends automatically after the second button is learned.
21
25
27
28
IR PGM Volume
Phonitor Matrix Switch
IR Receiver
Power LED
25
21
28
27
28
27
25
EN
DE
